All hacks

Homemade Toniebox-style story box built on an ESP32 with Claude

A 3D-printed cube plays a story when a figurine with an NFC tag sits on top, and stops when you lift it off.

Homemade Toniebox-style story box built on an ESP32 with Claude
Homemade Toniebox-style story box built on an ESP32 with Claude, as posted by Zebra Rodeo
Photo: Zebra Rodeo, from the original post.

A 3D-printed cube now plays bedtime stories for three kids. Stand a figurine with an NFC tag on the engraved circle on top and the matching story starts; lift it off and it stops. Inside is an ESP32, a PN532 NFC reader, a microSD card for the tracks, an amplifier and speaker, and a 3000 mAh lithium cell charged over USB-C.

The builder started with no electronics background and talked the circuit through with Claude. Claude then helped turn the breadboard prototype into a clean KiCad schematic, reading datasheets and fetching footprints, and it caught three mistakes before the boards were ordered, including a regulator that would have put about 13.7 V on the 3.3 V rail. The 491 PCB tracks were routed by hand. Five assembled boards from JLCPCB came to 160 euros, and the first one worked.

The repo has the enclosure files, manufacturing files, firmware and build notes under an MIT licence, and the write-up includes a candid list of what smoked, snapped or failed silently. Code and write-up are on Zebra Rodeo’s site and GitHub.

All credit to Zebra Rodeo. The full story is at the original source.

Cracked something open?

Send us your hack. Clever, useful or gloriously pointless, we want to see it.

Submit a hack