JBL PartyBox speaker controlled from Home Assistant after its app was reverse-engineered with Claude
A Home Assistant add-on drives a JBL PartyBox over Bluetooth: volume, EQ, RGB light show and 22 MQTT entities, no phone app.


A JBL PartyBox that only answered to its phone app can now be run from Home Assistant. The add-on handles volume, mute, bass boost, a 3-band EQ, track controls with song and artist, and the light show, which has 12 patterns and takes any RGB colour. It also publishes 22 entities over MQTT, so the lights can follow the rest of the house.
The builder decompiled the JBL Android app and worked out its Bluetooth protocol, with a lot of help from Claude. The add-on talks to the speaker directly and reconnects after power cycles. There’s a debug panel that shows every frame. It needs Home Assistant OS or Supervised, Mosquitto and a Bluetooth adapter in range.
Add the GitHub repo as an app repository to try it. It’s only been tested on one PartyBox 310, so other models are a gamble, and the builder wants reports. Code and write-up are on wesleykoevoets’s GitHub, and the original post has the details.
All credit to u/wesleykoevoets. The full story is at the original source.



